Fujitsu FI-6000NS - Page 419

Network Scanner fi-6000NS Operator's Guide 391
C
1314002C Insufficient memory. Try turn-
ing the power off and back on
again. If problem persists, the
administrator should contact the
FUJITSU scanner dealer or an
authorized FUJITSU scanner
service provider for help.
Reduce the size of the scan data or set a
lower resolution level, and try again.
13061001 Scan error occurred.
File name: xxxxx
Error code: xxxxx
Shutdown and press the startup button to
restart the scanner.
If the error status persists, contact your
FUJITSU scanner dealer or an authorized
FUJITSU scanner service provider.
13061002
13061003
83070006 Scanner hardware failure. The
administrator should contact the
FUJITSU scanner dealer or an
authorized FUJITSU scanner
service provider for help.
Shutdown and press the startup button to
restart the scanner.
If the problem persists, contact your
FUJITSU scanner dealer or an authorized
FUJITSU scanner service provider.
83070007
83070008
8307000C
84000001 An error has occurred. Try turn-
ing the power off and back on
again. If problem persists, the
administrator should contact the
FUJITSU scanner dealer or an
authorized FUJITSU scanner
service provider for help.
[alphanumeric eight digits]
Shutdown and press the startup button to
restart the scanner.
If the error status persists, contact your
FUJITSU scanner dealer or an authorized
FUJITSU scanner service provider.
84000002 An error has occurred. The sys-
tem must be restarted. Any
buffered jobs will be canceled.
If problem persists, the admin-
istrator should contact a
FUJITSU scanner dealer or an
authorized FUJITSU scanner
service provider for help.
[alphanumeric eight digits]
If the problem persists, the administrator
should contact a FUJITSU scanner dealer
or an authorized FUJITSU scanner service
provider.
Code Message Action