153
PRIMERGY RX300 S3 User’s Guide
5
Operations after OS Installation
4 Click [or Insert a ServerStart Floppy Disk to Start ServerStart].
The [Welcome to ServerStart] window appears.
5 Eject the ServerStart floppy disk.
■ Creating a Hardware Configuration Tool Floppy Disk
Start up ServerStart and confirm that the [Welcome to ServerStart] window is displayed.
1 Start up ServerStart and click [FloppyBuilder].
The [ServerStart FloppyBuilder] window appears.
2 Click [Hardware Configuration Tools].
3 Click the tool you want to create.
Insert the prepared floppy disk by following the message.
To Next Page
Loading...
