Fujitsu Primergy RX300 S3 User Manual

243
PRIMERGY RX300 S3 User's Guide
8
Configuring Hardware and Utilities
8.1.10 The IPMI Submenu
This submenu appears when you select [IPMI] from the Advanced menu.
Use this submenu to configure the integrated Remote Management Controller (iRMC) settings.
table: Items on the IPMI Submenu
Item Setting Description
SEL Load Displays the percentage of the SEL stored.
Clear System Event Log Disabled (Unchangeable) Deletes the logs stored in the System Event Log
(SEL). (Do not delete the SEL from this menu.)
Event Log Full Mode Overwrite (Unchangeable) Configures the log settings when the SEL becomes
full.
iRMC Time Sync Enabled (Unchangeable) Sets whether or not to synchronize the internal
timer of the iRMC with RTC when booting.
System Event Log Displays the content of the SEL.
The system event logs referable in this submenu are for reference only. For details
on the system event logs, see "9.3 System Event Log" (pg.274).
SDRR Browser Displays data for each sensor.
LAN Settings Sets the LAN when remote controlled by the RemoteControlService.
"
■ The LAN Settings Submenu" (pg.244)
PhoenixBIOS Setup Utility
Item Specific Help
Select Item
Select Menu
Change Values
Select > Sub-Menu
-/+
Enter
F1
Esc
Help
Exit
F9
F10
Setup Defaults
Save and Exit
Advanced Security Server ExitMain
IPMI
xx%
[Disabled]
[Overwrite]
[Enabled]
SEL Load
Clear System Event Log
Event Log Full Mode
iRMC Time Sync
System Event Log
SDRR Browser
LAN Setting
>
>
>

Fujitsu Primergy RX300 S3 Specifications

General

Tcase	78 °C
Bus type	FSB
FSB Parity	Yes
Processor cache	4 MB
Processor cores	2
Processor model	5080
Processor series	Intel Xeon 5000 Series
Processor socket	LGA 771 (Socket J)
Processor threads	4
Processor codename	Dempsey
Motherboard chipset	Intel® 5000P
Processing Die size	162 mm²
Processor frequency	3.73 GHz
Processor cache type	L2
Processor lithography	65 nm
Processor system type	DP
Processor manufacturer	Intel
Processor package size	37.5 x 37.5 mm
Processor front side bus	1066 MHz
Processor operating modes	64-bit
ECC supported by processor	No
Thermal Design Power (TDP)	130 W
Processor core voltage (AC)	1.25 - 1.40 V
CPU multiplier (bus/core ratio)	14
Number of Processing Die Transistors	376 M
Maximum graphics card memory	8 MB
Memory slots	8
Internal memory	2 GB
Internal memory type	DDR2-SDRAM
Maximum internal memory	32 GB
Memory layout (slots x size)	2 x 1 GB
Networking features	Ethernet/Fast Ethernet/Gigabit Ethernet
Expansion slots	1 x PCIe x8, 2 x PCIe x4, 2 x PCI-X
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Noise level	56 dB
Chassis type	Rack (2U)
Compatible operating systems	Windows Server 2003, Novell SUSE Linux Enterprise Server, Red Hat Enterprise Linux, VMware ESX
I/O ports	8 x SAS
Power supply	600 W
Power requirements	100 - 240V, 50/60 Hz
Operating temperature (T-T)	10 - 35 °C
Safety	IEC 60950-1, EN 60950-1
Electromagnetic compatibility	EN 55 022 A, EN 55024, EN 61000-3-2 / -3-3
RAID levels	1, 5, 10, 50
Processor ARK ID	27213

Weight and Dimensions

Depth	785 mm
Width	483 mm
Height	86 mm
Weight	25000 g