Fujitsu Primergy RX300 S3 - The CPU Status Submenu

248
Chapter 8 Configuring Hardware and Utilities
8.1.13 The CPU Status Submenu
This submenu appears when selecting [CPU Status] in the Server menu.
Use this submenu to set whether or not to allow the use of the installed CPU.
Memory Scrubbing Disabled (Unchangeable) Sets whether or not to correct errors in memory
domains currently unused by the OS, or by
application programs.
CPU Status Sets whether or not to allow the use of the installed CPU.
"8.1.13 The CPU Status Submenu" (pg.248)
Memory Status Sets whether or not to allow the use of the installed memory modules.
"8.1.14 The Memory Status Submenu" (pg.249)
Console Redirection Configures detailed settings for console redirection.
"8.1.15 The Console Redirection Submenu" (pg.250)
table: Items on the CPU Status Menu
Item Setting Description
CPU 1 Status Enabled (Unchangeable) Sets whether or not to allow the use of the CPUs
installed in CPU sockets 1 and 2.
If "Disabled" or "Failed" is displayed, replace the
faulty CPU and then change the setting to
"Enabled".
CPU 2 Status
table: Items on the Server Menu
Item Setting Description
PhoenixBIOS Setup Utility
Item Specific HelpCPU Status
Select Item
Select Menu
Change Values
Select > Sub-Menu
-/+
Enter
F1
Esc
Help
Exit
F9
F10
Setup Defaults
Save and Exit
Advanced Security Server ExitMain
CPU 0 Status
CPU 1 Status
[Enabled]
[Enabled]