155
PRIMERGY RX300 S3 User’s Guide
5
Operations after OS Installation
5.5 Notes Before Operating the
Server
This section explains the settings required before starting to operate the server.
For details on the settings, refer to the following URL.
http://www.microsoft.com/technet/prodtechnol/exchange/2003/Library/default.mspx
• If a LAN card was added, install a driver according to "4.3 Installing the LAN Driver" (pg.126).
• To connect optional SCSI devices, refer to "Chapter 7 Installing Internal Options" (pg.179).
• For the settings for the installed applications supplied with the product, refer to the manuals of each
application.
5.5.1 Applying the Hotfix
A hotfix needs to be applied in order to operate the server. For the hotfix, use the "ServerStart Disc 1
CD-ROM" supplied with the server.
■ Installing Windows Server 2003
Please install hotfix module named KB912944 after Windows 2003 Server OS installation.
Please find out hotfix module of your language version from the following folder on ServerStart CD.
• For Windows Server 2003
[CD-ROM drive]: \HOTFIX\W2K3
• For Windows Server 2003 x64
[CD-ROM drive]: \HOTFIX\W2K3x64
■ Installing Windows 2000 Server
To install Windows 2000 Server directly, you have to use Service pack 4 integrated OS media or install
Service Pack 4 or newer Service Pack.
And please install hotfix module named KB904374 after OS installation.
Please find out hotfix module of your language version from the following folder on ServerStart CD.
[CD-ROM drive]: \HOTFIX\W2K\
To Next Page
Loading...
