Fujitsu Primergy RX300 S3 User Manual

240
Chapter 8 Configuring Hardware and Utilities
8.1.8 The Advanced System Configuration Submenu
This submenu appears when you select [Advanced System Configuration] from the Advanced menu.
Configures additional settings.
table: Items on the Advanced System Configuration Submenu
Item Setting Description
BIOS Work Space Location Expansion ROM Area
(Unchangeable)
Sets whether to enable or disable the PCI bus parity
checking.
Memory Redundancy • Disabled (Initial value)
• Mirroring
Sets whether or not to use the mirroring function.
Installation of Server View is required for using the
mirroring function.
CPU Mismatch Detection Enabled (Unchangeable) Sets whether to enable or disable checking the CPU
type and frequency.
CPU Timeout Counter Disabled (Unchangeable) Not supported by this server.
CPU Frequency (GHz) Automatic (Unchangeable) Configures the clock frequency of CPU.
Hyper-Threading • Disabled (Initial value)
• Enabled
Sets whether or not to run one CPU as a dual-
processing CPU. Setting this to "Enabled" may
enhance processing performance by allowing
maximum use of the processor resources.
Limit CPUID functions Disabled (Unchangeable) Configures the CPU internal settings.
CPU Halt Mode Enhanced (Unchangeable) Configures the CPU internal settings.
NX Memory Protection • Disabled (Initial value)
• Enabled
CPU MC Status Clear Next Boot (Unchangeable)
Enhanced Speed Step Disabled (Unchangeable) Sets whether or not to use the power saving
function.
Virtualization Technology • Disabled (Initial value)
• Enabled
Sets whether to enable or disable Virtualization
Technology. This item may not be displayed
depending on CPU.
PhoenixBIOS Setup Utility
Item Specific Help
Select Item
Select Menu
Change Values
Select > Sub-Menu
-/+
Enter
F1
Esc
Help
Exit
F9
F10
Setup Defaults
Save and Exit
Advanced Security Server ExitMain
Advanced System Configuration
BIOS Work Space Location:
Memory Redundancy:
CPU Mismatch Detection:
CPU Timeout Counter:
CPU Frequency (GHz):
Hyper-Threading:
Limit CPUID Functions:
CPU Halt Mode:
NX Memory Protection:
CPU MC Status Clear:
Enhanced Speed Step:
Virtualization Technology:
Hardware Prefetch
Adjacent Sector Prefetch
High Precision Event Timer:
I/O AT:
[Expansion ROM Area]
[Disabled]
[Enabled]
[Disabled]
[Automatic]
[Enabled]
[Disabled]
[Enhanced]
[Disabled]
[Next Boot]
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]

Fujitsu Primergy RX300 S3 Specifications

General

Tcase	78 °C
Bus type	FSB
FSB Parity	Yes
Processor cache	4 MB
Processor cores	2
Processor model	5080
Processor series	Intel Xeon 5000 Series
Processor socket	LGA 771 (Socket J)
Processor threads	4
Processor codename	Dempsey
Motherboard chipset	Intel® 5000P
Processing Die size	162 mm²
Processor frequency	3.73 GHz
Processor cache type	L2
Processor lithography	65 nm
Processor system type	DP
Processor manufacturer	Intel
Processor package size	37.5 x 37.5 mm
Processor front side bus	1066 MHz
Processor operating modes	64-bit
ECC supported by processor	No
Thermal Design Power (TDP)	130 W
Processor core voltage (AC)	1.25 - 1.40 V
CPU multiplier (bus/core ratio)	14
Number of Processing Die Transistors	376 M
Maximum graphics card memory	8 MB
Memory slots	8
Internal memory	2 GB
Internal memory type	DDR2-SDRAM
Maximum internal memory	32 GB
Memory layout (slots x size)	2 x 1 GB
Networking features	Ethernet/Fast Ethernet/Gigabit Ethernet
Expansion slots	1 x PCIe x8, 2 x PCIe x4, 2 x PCI-X
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Noise level	56 dB
Chassis type	Rack (2U)
Compatible operating systems	Windows Server 2003, Novell SUSE Linux Enterprise Server, Red Hat Enterprise Linux, VMware ESX
I/O ports	8 x SAS
Power supply	600 W
Power requirements	100 - 240V, 50/60 Hz
Operating temperature (T-T)	10 - 35 °C
Safety	IEC 60950-1, EN 60950-1
Electromagnetic compatibility	EN 55 022 A, EN 55024, EN 61000-3-2 / -3-3
RAID levels	1, 5, 10, 50
Processor ARK ID	27213

Weight and Dimensions

Depth	785 mm
Width	483 mm
Height	86 mm
Weight	25000 g