EasyManua.ls Logo

Fujitsu Primergy RX300 S3 - Maintenance Service; Contacting Maintenance Support

Fujitsu Primergy RX300 S3
313 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
288
Chapter 9 Operation and Maintenance
9.8 Maintenance Service
This section explains the details of the maintenance service.
If the cause of the failure is uncertain or if the original condition cannot be restored,
contact the seller or an office listed in the "Contact Information" of the "Start Guide".
9.8.1 Contacting Maintenance Support
For "Contact Information", refer to "Start Guide". Before contacting maintenance support, check the
following.
Model name and product ID of the server
They are described on the label on the server. For the label location, refer to "Start Guide".
Hardware configuration (Types and locations of internal options)
Configuration information (BIOS Setup Utility, WebBIOS settings)
•OS
LAN/WAN system configuration
Phenomena (what happened when doing what, what was displayed, etc.)
Date/time of occurrence
Environmental settings of the server
•LED statuses
Print and fill in the "Configuration Sheet" and "Accident Sheet" of "Configuration Sheets" .

Table of Contents

Other manuals for Fujitsu Primergy RX300 S3

Related product manuals