Fujitsu Primergy RX300 S3 - 8.1.4 The Boot Options Submenu

233
PRIMERGY RX300 S3 User's Guide
8
Configuring Hardware and Utilities
8.1.4 The Boot Options Submenu
This submenu appears when selecting [Boot Options] from the main menu.
Use this submenu to set system startup options.
table: Items on the Boot Options Submenu
Item Setting Description
POST Errors Halt On All Errors
(Unchangeable)
Sets whether or not to stop the boot process and
shut down the system in case a POST (Power On
Self Test) error is detected.
• No Halt On Any Errors
Does not halt the system boot process. Ignores
any errors detected.
• Halt On All Errors
Halts the system in case errors are detected by
POST (Power On Self Test) at the time of its
completion.
Keyboard Check • Disabled
• Enabled (Initial value)
Sets whether or not to have POST perform a
keyboard connection confirmation.
SM Error Halt Disabled (Unchangeable) Sets the procedure in case a fan or temperature
sensor occurs.
Fast Boot Disabled (Unchangeable) Sets whether or not to reduce the scope of POST
and thereby speed up system startup.
Quiet Boot Disabled (Unchangeable) Sets whether or not to display the logo screen
instead of POST information.
NumLock Auto (Unchangeable) Sets the state of the Num Lock key when turning
the power on.
PhoenixBIOS Setup Utility
Item Specific HelpBoot Options
Select Item
Select Menu
Change Values
Select > Sub-Menu
-/+
Enter
F1
Esc
Help
Exit
F9
F10
Setup Defaults
Save and Exit
Advanced Security Server ExitMain
[Halt On All Errors]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[Auto]
[Enabled]
[Enabled]
CD-ROM Drive
+Diskette
+Hard Drive
Legacy LAN Card
POST Errors:
Keyboard Check:
SM Error Halt:
Fast Boot:
Quiet Boot:
NumLock:
Boot Menu:
MultiBoot for HDs:
Boot sequence:
>