234
Chapter 8 Configuring Hardware and Utilities
Boot Menu Enabled (Unchangeable) Sets whether or not to enable the Boot menu.
MultiBoot for HDs Enabled (Unchangeable) Sets whether or not to enable selection of which
hard disk unit to load the OS from, when multiple
hard disk units are installed.
Boot Sequence Displays the Boot
Sequence by pressing the
[Enter] key.
• CD-ROM Drive
• Diskette
•Hard Drive
• Legacy LAN Card
Specifies the drives from which the OS is loaded
and the precedence order of the drives. Use the [+]
[-] keys to change the priority order for the selected
device. Booting from the selected device can be
disabled by pressing the [Space] key. (When it is
disabled, [ ! ] appears in front of the device name.)
If a non-existent device appears in the list, it can be
deleted by pressing the [*] key.
table: Items on the Boot Options Submenu
Item Setting Description
To Next Page
Loading...
