Fujitsu Primergy RX300 S3 - Installation Location of Expansion Cards

196
Chapter 7 Installing Internal Options
7.5.1 Installation Location of Expansion Cards
This server is equipped with five PCI slots, and a maximum of five expansion cards can be installed. If
the server is equipped with the standard card slot conversion feature, a maximum of three expansion
cards can be installed.
 When a device with slow clock frequency is installed, the PCI Bus Clock operates at the slow device's
clock.
 When the standard card slot conversion feature is used, the PCI Bus Clock for slot 8 is fixed. When a
single card is installed in either slot 7 or slot 6, the PCI Bus Clock operates at 133MHz.
"Standard"
"With basic card slot conversion kit"
PCI slot 5 (PCI-Express x 8)
PCI slot 4 (PCI-Express x 4)
PCI slot 3 (PCI-Express x 4)
PCI slot 2 (PCI-X 64bit 133MHz)
PCI slot 1 (PCI-X 64bit 133MHz)
PCI slot 7 (PCI-X 64bit 133MHz)
PCI slot 8 (PCI-X 64bit 133MHz)
PCI slot 6 (PCI-X 64bit 133MHz)
Front
Rear