EasyManuals Logo

Fujitsu Primergy RX300 S3 User Manual

Fujitsu Primergy RX300 S3
313 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #168 background imageLoading...
Page #168 background image
168
Chapter 5 Operations after OS Installation
4 Select the Team name of the Teamed Up adapter, and click [Fallback] from the
[Team Properties] tab in the right pane of the window.
Confirm that the mark moved from the standby adapter to the primary adapter and
communication is maintained.
5.6.5 Cautions for Onboard LAN Driver
Event Log
Once a Team and VLAN are setup, multiple logs that start with the following log may be stored in the
system log file of the event viewer at system start-up.
Since such event logs will be stored even if the Teaming function and VLAN function are operated
normally, ignore them.
Source Blfm
ID
8
Type Error
Description Could not bind to adapter \DEVICE\{(adapter name)}.
* (adapter name) varies depending on the OS or hardware
configuration.

Table of Contents

Other manuals for Fujitsu Primergy RX300 S3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu Primergy RX300 S3 and is the answer not in the manual?

Fujitsu Primergy RX300 S3 Specifications

General IconGeneral
Tcase78 °C
Bus typeFSB
FSB ParityYes
Processor cache4 MB
Processor cores2
Processor model5080
Processor seriesIntel Xeon 5000 Series
Processor socketLGA 771 (Socket J)
Processor threads4
Processor codenameDempsey
Motherboard chipsetIntel® 5000P
Processing Die size162 mm²
Processor frequency3.73 GHz
Processor cache typeL2
Processor lithography65 nm
Processor system typeDP
Processor manufacturerIntel
Processor package size37.5 x 37.5 mm
Processor front side bus1066 MHz
Processor operating modes64-bit
ECC supported by processorNo
Thermal Design Power (TDP)130 W
Processor core voltage (AC)1.25 - 1.40 V
CPU multiplier (bus/core ratio)14
Number of Processing Die Transistors376 M
Maximum graphics card memory8 MB
Memory slots8
Internal memory2 GB
Internal memory typeDDR2-SDRAM
Maximum internal memory32 GB
Memory layout (slots x size)2 x 1 GB
Networking featuresEthernet/Fast Ethernet/Gigabit Ethernet
Expansion slots1 x PCIe x8, 2 x PCIe x4, 2 x PCI-X
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Noise level56 dB
Chassis typeRack (2U)
Compatible operating systemsWindows Server 2003, Novell SUSE Linux Enterprise Server, Red Hat Enterprise Linux, VMware ESX
I/O ports8 x SAS
Power supply600 W
Power requirements100 - 240V, 50/60 Hz
Operating temperature (T-T)10 - 35 °C
SafetyIEC 60950-1, EN 60950-1
Electromagnetic compatibilityEN 55 022 A, EN 55024, EN 61000-3-2 / -3-3
RAID levels1, 5, 10, 50
Processor ARK ID27213
Weight and Dimensions IconWeight and Dimensions
Depth785 mm
Width483 mm
Height86 mm
Weight25000 g

Related product manuals