Fujitsu Primergy RX300 S3 - Configure Settings in Wizards

77
PRIMERGY RX300 S3 User’s Guide
3
OS Installation Using ServerStart
3.2.2 Configure Settings in Wizards
Click the wizards to set items in the following procedures. For setting procedures, refer to description on
guided mode wizards ("3.1.2 Open/create a Configuration File" (
Jpg.60) to "3.1.5 Application Wizard"
(
Jpg.70)).
Exiting a wizard returns the display to the preconfiguration mode window.
Open/create configuration file
OS installation wizard
Application wizard
Close/save configuration file
Starting OS installation
RAID and Disk wizard
Activate ServerStart in the server