205
PRIMERGY RX300 S3 User's Guide
7
Installing Internal Options
7.6.1 Installation Locations of Internal Hard Disk Units
Install the internal hard disk unit in a 3.5-inch storage bay at the front of server. Up to six units can be installed.
When an internal backup device is installed, a maximum of four internal hard disk units can be installed.
7.6.2 Installable Internal Hard Disk Units and the
Installation Order
■ Installable internal hard disk unit
Before installing an internal hard disk unit, see "B.3 Internal Hard Disk Units" (pg.293) to check the
packaged product.
■ Installation Order
Install the internal hard disk units in the 3.5-inch storage bays in the following order.
table: List of installable hard discs
Product name Model Overview
Internal hard disk unit - 73GB PG-HDB75A 73.4GB, 15,000rpm, SAS
3.5-inch, hot plug support
Internal hard disk unit - 147GB PG-HDB45A 146.8GB, 15,000rpm, SAS
3.5-inch, hot plug support
table: Installation order of internal hard disk units
Status of the 3.5-inch storage bay Installation order
Standard installation
Bay 1 → Bay 2 → Bay 3 → Bay 4 → Bay 5 → Bay 6
When an internal backup device is
installed
Bay 1 → Bay 4 → Bay 5 → Bay 6
Bay 3
Bay 2
Bay 1
Bay 6
Bay 5
Bay 4
To Next Page
Loading...
