Fujitsu Primergy RX300 S3 - The Exit Menu

251
PRIMERGY RX300 S3 User's Guide
8
Configuring Hardware and Utilities
8.1.16 The Exit Menu
This menu exits the BIOS Setup Utility.
table: Items on the Exit Menu
Item Description
Save Changes & Exit Saves the current settings to CMOS and closes the BIOS Setup Utility. At the same
time the server restarts.
Discard Changes & Exit Exits the BIOS Setup Utility without saving the current settings. The previously
saved settings remain valid.
Get Default Values Reads and displays the default values of this server.
Load Previous Values Reads and displays the values valid at the time BIOS Setup Utility was loaded.
PhoenixBIOS Setup Utility
Item Specific Help
Select Item
Select Menu
Change Values
Execute Command
-/+
Enter
F1
Esc
Help
Exit
F9
F10
Setup Defaults
Save and Exit
Advanced Security Server ExitMain
Save Changes & Exit
Discard Changes & Exit
Get Default Values
Load Previous Values