Fujitsu Primergy RX300 S3 - VLAN Setup Procedure

165
PRIMERGY RX300 S3 User’s Guide
5
Operations after OS Installation
6 Click [Apply] to apply the settings.
After the network is temporarily disconnected, a window is displayed. Click [Yes (Y)].
When continuing to VLAN settings, go to "5.6.3 VLAN Setup Procedure" (pg.165).
5.6.3 VLAN Setup Procedure
1 Start up BACS. The procedure differs depending on the OS being used.
For Windows Server 2003 / Windows Server 2003 x64
1. Click [Start] → [Control Panel] → [Broadcom Control Suite 2].
For Windows 2000 Server
1. Click [Start] → [Settings] → [Control Panel].
The [Control Panel] window appears.
2. Start up "Broadcom Control Suite 2".
2 Right-click a LAN adapter or the Team name of a Teamed Up adapter and click
[Create a VLAN] or [Add VLAN] from the displayed menu.
 A LAN adapter is displayed with a mark.
 The Team name of a Teamed Up adapter is displayed with a mark.
3 Click [Expert Mode] form the [Welcome to the Broadcom Teaming Wizard]
window.