304
Appendix
D.3 Window of the Remote Management Controller
The Remote Management Controller uses the Web interface function.
The following window appears when starting the Remote Management Controller.
The following functions are available.
For usage of the Remote Management Controller, refer to "ServerView User's Guide".
table: Functions of the Remote Management Controller
Item Description
System Information Displays information of the system.
iRMC Information Displays Remote Management Controller information and configures
the license key.
Power On/Off Displays the server power status. This is also used to turn the server
power ON/OFF or restart.
Sensors Displays the status of each server sensor (fan, temperature, voltage and
power supply).
System Event Log Displays the system event log.
Server Management Displays the server management information. This is also used to
configure the server settings.
Network Settings Configures the network settings.
Alerting Sends alert e-mail.
User Management Displays and sets the information of users.
Advanced Video Redirection Configures the console redirection and starts it up.