65
PRIMERGY RX300 S3 User’s Guide
3
OS Installation Using ServerStart
3.1.4 OS Installation Wizard
Set computer information, user information, and the network protocol.
ServerStart can configure multiple network patterns. When configuring a domain controller, refer to
"Using ServerStart to Configure the Network".
The setup window differs depending on the OS to be installed. The following describes operations on
Windows Server 2003 R2.
To install another OS, interpret Windows Server 2003 R2 as your OS.
1 Click [Operating System Wizard: Operating system parameters].
The [Windows Installation] window appears.
2 Enter the password in [Password for Administrator account] and [Please repeat
Password] and click [Next].
If the password differs between [Password for Administrator account] and [Please repeat Pass-
word], an error dialog window appears. Enter the password correctly.
The [Computer Identification] window appears.
To Next Page
Loading...
