Fujitsu Primergy RX300 S3 User Manual

281
PRIMERGY RX300 S3 User’s Guide
9
Operation and Maintenance
9.4.3 Security When Disposing of the Server
■ Notes regarding the Deletion of Data from the Hard Disk When
Disposing of or Transferring the Server
When disposing of or transferring a server that has been used, the data in the hard disk may be read and
used unscrupulously. To prevent confidential or important data from leaking out, the data on the hard
disk must be wiped before disposal or transfer.
However, wiping the hard disk is not an easy task. Simply initializing (formatting) the hard disk or
deleting the files may give the pretense that the data no longer exists, but in reality the data is simply no
longer accessible to the OS, and it is still accessible to malicious individuals that can restore the data.
Therefore, if confidential or important data is saved to the hard disk, in addition to the operations
mentioned above, it is recommended to use third-party tools or services to wipe the data completely
from the disk to prevent its restoration.
When disposing of or transferring the server, it is the customer’s responsibility to wipe data contained in
the hard disk in order to prevent such important data from leaking.
Also, if software license agreements prohibit unauthorized distribution of software (OS or application
software), transferring the server without removing the software may violate the license agreements.
These issues must be taken into consideration.

Fujitsu Primergy RX300 S3 Specifications

General

Tcase	78 °C
Bus type	FSB
FSB Parity	Yes
Processor cache	4 MB
Processor cores	2
Processor model	5080
Processor series	Intel Xeon 5000 Series
Processor socket	LGA 771 (Socket J)
Processor threads	4
Processor codename	Dempsey
Motherboard chipset	Intel® 5000P
Processing Die size	162 mm²
Processor frequency	3.73 GHz
Processor cache type	L2
Processor lithography	65 nm
Processor system type	DP
Processor manufacturer	Intel
Processor package size	37.5 x 37.5 mm
Processor front side bus	1066 MHz
Processor operating modes	64-bit
ECC supported by processor	No
Thermal Design Power (TDP)	130 W
Processor core voltage (AC)	1.25 - 1.40 V
CPU multiplier (bus/core ratio)	14
Number of Processing Die Transistors	376 M
Maximum graphics card memory	8 MB
Memory slots	8
Internal memory	2 GB
Internal memory type	DDR2-SDRAM
Maximum internal memory	32 GB
Memory layout (slots x size)	2 x 1 GB
Networking features	Ethernet/Fast Ethernet/Gigabit Ethernet
Expansion slots	1 x PCIe x8, 2 x PCIe x4, 2 x PCI-X
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Noise level	56 dB
Chassis type	Rack (2U)
Compatible operating systems	Windows Server 2003, Novell SUSE Linux Enterprise Server, Red Hat Enterprise Linux, VMware ESX
I/O ports	8 x SAS
Power supply	600 W
Power requirements	100 - 240V, 50/60 Hz
Operating temperature (T-T)	10 - 35 °C
Safety	IEC 60950-1, EN 60950-1
Electromagnetic compatibility	EN 55 022 A, EN 55024, EN 61000-3-2 / -3-3
RAID levels	1, 5, 10, 50
Processor ARK ID	27213

Weight and Dimensions

Depth	785 mm
Width	483 mm
Height	86 mm
Weight	25000 g