Fujitsu Primergy RX300 S3 - Installing Windows Server 2003

119
PRIMERGY RX300 S3 User’s Guide
4
Manual OS Installation
3. Click [Next]. Follow the instructions in the window to perform installation.
4. When the "InstallShieled(R) wizard has completed" message appears, eject the
ServerStart CD-ROM from the CD-ROM drive and click [Finish] to restart the
system.
10 Install the Graphic driver.
1. Insert the ServerStart Disc 1 CD-ROM into the drive of the server.
When the ServerStart window appears, exit ServerStart.
2. Execute the following command on the CD-ROM.
[CD-ROM drive] :\DRIVERS\VIDEO\MATROX\w2k3x64\setup.bat
The installation wizard starts up.
3. Click [Next]. Follow the instructions in the window to perform installation.
4. When the "InstallShieled(R) wizard has completed" message appears, eject the
ServerStart CD-ROM from the CD-ROM drive and click [Finish] to restart the
system.
11 Installing high reliability tools.
To ensure stable server operation, refer to "Chapter 6 High Reliability Tools" (pg.173) and
install high reliability tools. Please install the Global Array Manager when you configure RAID.
The installation of Windows Server 2003 x64 has completed.
● Before Starting Operation
After OS installation, refer to "Chapter 5 Operations after OS Installation" (pg.135) and perform the
necessary procedures.
4.2.2 Installing Windows Server 2003
 For details on the OS settings, refer to the following URL.
http://www.microsoft.com/technet/prodtechnol/exchange/2003/Library/default.mspx
1 Create driver disks.
Prepare necessary drivers before installing Windows Server 2003.
Some drivers are created from the ServerStart CD-ROM.
For how to create driver disks, refer to "4.1 Creating Driver Disks" (
pg.112).