Fujitsu Primergy RX300 S3 - The Security Menu

245
PRIMERGY RX300 S3 User's Guide
8
Configuring Hardware and Utilities
8.1.11 The Security Menu
The Security menu sets the security options.
table: Items on the Security Menu
Item Setting Description
Setup Password Displays whether or not the setup password required for the setup is set.
When the password is not set, "Not Installed" is displayed. When the password is
set, "Installed" is displayed.
System Password Displays whether or not the system password is set.
When the password is not set, "Not Installed" is displayed. When the password is
set, "Installed" is displayed.
Set Setup Password Sets the setup password. A setup password prevents starting the BIOS Setup
without permission.
Select this field and press the [Enter] key, and then input the setup password.
For how to set, change, or delete the password, see "9.4.2 Security against
Unauthorized Use" (pg.279).
Setup Password Lock • Standard (Initial value)
•Extended
Sets the range of protection by the setup password.
The setup password must already be set.
Set System Password Sets the system password. The system password prevents unauthorized access to
the system.
The setup password must already be set.
Select this field and press the [Enter] key, and then input the system password.
For how to set, change, or delete the password, see "9.4.2 Security against
Unauthorized Use" (pg.279).
System Password Mode • System (Initial value)
• Keyboard
Sets the range of protection by the system
password. The setup password and the system
password must already be set.
System Load • Standard (Initial value)
• Diskette/CDROM Lock
Sets whether to enable or disable system startup
from a floppy disk or CD-ROM.
Setup Prompt • Disabled
• Enabled (Initial value)
Sets whether or not to display the setup message
"<F2> BIOS Setup / <F12> Boot Menu" in the
POST screen when system is restarted.
PhoenixBIOS Setup Utility
Item Specific Help
Select Item
Select Menu
Change Values
Select > Sub-Menu
-/+
Enter
F1
Esc
Help
Exit
F9
F10
Setup Defaults
Save and Exit
Advanced Security Server ExitMain
Setup Password
System Password
Set Setup Password:
Setup Password Lock:
Set System Password:
System Password Mode:
System Load:
Setup Prompt:
Virus Warning:
Diskette Write:
Flash Write:
Not installed
Not installed
[Press Enter]
[Standard]
[Press Enter]
[System]
[Standard]
[Enabled]
[Disabled]
[Enabled]
[Enabled]