244
Chapter 8 Configuring Hardware and Utilities
■ The LAN Settings Submenu
Use this submenu to set the LAN when remote controlled by the RemoteControlService.
table: Items on the LAN Settings Submenu
Item Setting Description
DHCP • Disabled (Initial value)
• Enabled
Sets whether or not to acquire LAN IP address of
iRMC from the DHCP server.
Local IP address Sets the IP address of the iRMC.
Note:
The iRMC uses the channel B of the onboard LAN shared with the OS.
Set an IP address different from the setting in the OS.
Subnet mask Enter the subnet mask of the onboard LAN specified in [Local IP address].
Gateway address Enter the gateway address of the onboard LAN specified in [Local IP address].
To Next Page
Loading...
