Fujitsu Primergy RX300 S3 User Manual

279
PRIMERGY RX300 S3 User’s Guide
9
Operation and Maintenance
9.4.2 Security against Unauthorized Use
A password can be set to prevent unauthorized use of the server.
When a password is set, the server is accessible only to the users who know the password.
The password is set in the BIOS Setup Utility. For details on the BIOS Setup Utility, refer to "8.1.11 The
Security Menu" (
pg.245).
■ Password Types
The following two types of password can be set in this server.
The password types define the privileges of server operations.
● System Password (Administrator Password)
This is the password that allows specific persons to access the BIOS setup. Unless the set password is
entered, the BIOS setup cannot be accessed and the OS cannot be booted.
● Setup Password (User password)
This is the password that allows specific persons to use the server. Unless the set password is entered,
part of the BIOS setup cannot be accessed and the OS cannot be booted.
■ Setting a Password
1 Start the BIOS Setup Utility.
"8.1.1 Starting and Exiting the BIOS Setup Utility" (pg.228)
2 Use the [←] [→] keys to select [Security] from the [Main] menu.
The [Security] menu appears.
3 Use the [↑] and [↓] keys to move the cursor to [Set System Password] or [Set
Setup Password], and press the [Enter] key.
The password entry window appears.
4 Enter the password in the [Enter New Password] field.
Alphanumeric characters can be used. Blocks are displayed instead of the letters entered. To
cancel the password setting, press the [Esc] key.
Set Setup(System) Password
Enter New Password [ ]
Confirm New Password [ ]

Fujitsu Primergy RX300 S3 Specifications

General

Tcase	78 °C
Bus type	FSB
FSB Parity	Yes
Processor cache	4 MB
Processor cores	2
Processor model	5080
Processor series	Intel Xeon 5000 Series
Processor socket	LGA 771 (Socket J)
Processor threads	4
Processor codename	Dempsey
Motherboard chipset	Intel® 5000P
Processing Die size	162 mm²
Processor frequency	3.73 GHz
Processor cache type	L2
Processor lithography	65 nm
Processor system type	DP
Processor manufacturer	Intel
Processor package size	37.5 x 37.5 mm
Processor front side bus	1066 MHz
Processor operating modes	64-bit
ECC supported by processor	No
Thermal Design Power (TDP)	130 W
Processor core voltage (AC)	1.25 - 1.40 V
CPU multiplier (bus/core ratio)	14
Number of Processing Die Transistors	376 M
Maximum graphics card memory	8 MB
Memory slots	8
Internal memory	2 GB
Internal memory type	DDR2-SDRAM
Maximum internal memory	32 GB
Memory layout (slots x size)	2 x 1 GB
Networking features	Ethernet/Fast Ethernet/Gigabit Ethernet
Expansion slots	1 x PCIe x8, 2 x PCIe x4, 2 x PCI-X
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Noise level	56 dB
Chassis type	Rack (2U)
Compatible operating systems	Windows Server 2003, Novell SUSE Linux Enterprise Server, Red Hat Enterprise Linux, VMware ESX
I/O ports	8 x SAS
Power supply	600 W
Power requirements	100 - 240V, 50/60 Hz
Operating temperature (T-T)	10 - 35 °C
Safety	IEC 60950-1, EN 60950-1
Electromagnetic compatibility	EN 55 022 A, EN 55024, EN 61000-3-2 / -3-3
RAID levels	1, 5, 10, 50
Processor ARK ID	27213

Weight and Dimensions

Depth	785 mm
Width	483 mm
Height	86 mm
Weight	25000 g