303
PRIMERGY RX300 S3 User’s Guide
Appendix
A
1 Turn on the server. Press the [F2] key during POST to start up the BIOS Setup
Utility.
2 Select the [Advanced] menu → [IPMI] → the [LAN Settings] submenu, and set
the each item.
For setting items, refer to "■ The LAN Settings Submenu" (pg.244)
3 From the [Exit] menu, select [Saving Changes & Exit] to exit the BIOS Setup
Utility.
Save the setting information of set parameters using the Server Management Tools.
For details, refer to "5.3 Storing the System Configuration Information"( → pg.148).
■ Connecting the Server to a PC
Connect the server to a PC using a LAN cable.
LAN Port
LAN Port B
HUB
LAN cable
Server Rear
PC Rear
To Next Page
Loading...
