166
Chapter 5 Operations after OS Installation
4 Specify [Team Name] , [VLAN ID] and [VLAN Name] in the [Create New VLAN]
window.
If you selected [Add VLAN] in step 2, the [Team Name] is not displayed.
The [VLAN ID] should be identical with the switch setting.
The [VLAN Name] does not need to be identical with the switch setting.
You cannot use a "VLAN ID" or "VLAN Name" that has already been used. Enter another set
value.
5 When the setting for the team is completed, click [OK].
6 Click [Apply] to apply the settings.
After the network is temporarily disconnected, a window is displayed. Click [Yes (Y)].
To Next Page
Loading...
