Fujitsu Primergy RX300 S3 - Page 17

17
PRIMERGY RX300 S3 User’s Guide
1
Overview
● Supported OS
The following OSs can be installed using ServerStart V5.603.
• Microsoft
®
Windows Server
™
2003, Standard Edition
• Microsoft
®
Windows Server
™
2003, Enterprise Edition
• Microsoft
®
Windows Server
™
2003, Standard x64 Edition
• Microsoft
®
Windows Server
™
2003, Enterprise x64Edition
• Microsoft
®
Windows Server
™
2003 R2, Standard Edition
• Microsoft
®
Windows Server
™
2003 R2, Enterprise Edition
• Microsoft
®
Windows Server
™
2003 R2, Standard x64 Edition
• Microsoft
®
Windows Server
™
2003 R2, Enterprise x64Edition
• Microsoft
®
Windows
®
2000 Server
• Microsoft
®
Windows
®
2000 Advanced Server
 ServerStart does not support to install Linux.
● Configuration File (SerStartBatch.ini)
A configuration file stores the server setup and client information configured in ServerStart. To create a
configuration file, use the ServerStart floppy disk supplied with this server. Store only one file on each
floppy disk. Do not set the ServerStart floppy disk to the write-protected state.
You can use any name for the configuration file. However, the file must be installed in the server as
"SerStartBatch.ini". When installing the file, make sure to save it as "SerStartBatch.ini" on the
ServerStart floppy disk.
Start up ServerStart, insert the ServerStart floppy disk containing "SerStartBatch.ini", and click [Start] to
install the server.