183
PRIMERGY RX300 S3 User's Guide
7
Installing Internal Options
6 Slide out the server.
Hold the handle and slide out the server until it clicks, and the server is locked on the rail on both
sides.
7 Slide back the top cover while pushing the button on both sides.
8 Slowly lift up the top cover and remove it from the server.
■ How to Attach the Top Cover
Attaching the top cover by reversing the procedure in "7.2.1 How to Remove the Top Cover" (pg.182).
When sliding the server back in, press and release the lock on the right-side rail.
• Be careful not to pinch fingers or clothes when sliding out the server or pushing
it back. Failure to do so may cause injury.
• Before attaching the top cover, make sure no unnecessary parts or tools are
left inside the server.
• When turning on the server, make sure the top cover is closed.
Handles
Lock
Buttons Top cover
To Next Page
Loading...
