Fujitsu Primergy RX300 S3 - Page 198

198
Chapter 7 Installing Internal Options
● When Using the Standard Card Slot Conversion Feature
[Note 1]: PG-1862 cannot be installed simultaneously with other LAN cards.
■ Installation Location and Order of Expansion Cards
Install each expansion card in the PCI slots in the number order described in the following table and
install them according to the installation order. Expansion cards will not operate normally unless
installed in the specified locations.
● When Using Standard Card Slots
● When Using the Standard Card Slot Conversion Feature
table: Installable Expansion Cards Using the Standard Card Slot Convert Feature
Installed card Model Remarks
SCSI array controller card PG-142E3 Ultra320 SCSI 2ch, for optional external SCSI
devices (incl. array system), with battery backup
function
SCSI card PG-1281 Ultra160 SCSI
LAN card (1000BASE-T) PG-1892 -
LAN card (1000BASE-SX) PG-1882 1000BASE-SX
LAN card (1000BASE-T) (Note 1) PG-1862 1000BASE-T
Communication card V/X PG-1631 -
table: Installation Location/Order of Expansion Cards
Installable expansion card (model)
PCI slot
Maximum number
of installed cards
Installation
order
1 2 3 4 5
Parallel port option (PG-PP05) - - - 2 1 1
5
1
Serial port option (PG-COM03) - - - 2 - - 2
SCSI card (PG-1301L) 1 2 - - - 2 3
Fiber channel card (PG-FC202) - - 1 2 3 2 4
LAN card (PG-2861L) - - 1 2 3 2 5
LAN card (PG-1892L) 1 2 - - - 2 6
LAN card (PG-1882L) 1 2 - - - 2 7
table: Installation Location/Order of Expansion Cards
Installable expansion card (model)
PCI slot
Maximum number
of installed cards
Installation
order
6 7 8
SCSI array controller card (PG-142E3) 1 2 - 2
3
1
SCSI card (PG-1281) 1 2 3 2 2
LAN card (PG-1892) 1 2 3 2 3
LAN card (PG-1882) 1 2 3 2 4
LAN card (PG-1862) 1 2 3 2 5
Communication card V/X (PG-1631) 1 2 3 1 6