211
PRIMERGY RX300 S3 User's Guide
7
Installing Internal Options
4. Draw the fixing lever of fan cage upwards (1), push the fan cage towards the device
(2), and raise it upwards (3) to remove it.
5 Remove all three cable covers at the side of the device.
The cable covers can be removed by pushing the four tabs at the side of the body.
6 Remove all the internal hard disk units and the dummy units.
• Remove the internal hard disk units
Lift up the handle while pressing the front tab of the internal hard disk unit (1), and pull it (2).
Be sure to put a hand on the internal hard disk unit and pull it with both hands.
Fixing lever of fan cage
Handle
Tab
To Next Page
Loading...
