Fujitsu Primergy RX300 S3 - Page 57

57
PRIMERGY RX300 S3 User’s Guide
3
OS Installation Using ServerStart
3 Click [OK].
The [Initialization of ServerStart core running] window appears and the ServerStart initialization
process starts. Depending on the hardware configuration, this process may take a few minutes.
When the process is completed, the [Create a ServerStart Floppy Disk] window appears.
4 Click [Build a ServerStart Floppy Disk].
Creation of a ServerStart floppy disk starts. When the creation is completed, the "Floppy disk has
been created
" message appears.
5 Click [OK].
"
Please Select your keyboard" Window appears.