Fujitsu Primergy RX300 S3 User Manual

80
Chapter 3 OS Installation Using ServerStart
4. If a message prompts you to insert the Service Pack CD-ROM, insert the CD-ROM
and click [OK].
This message does not appear when Service Pack is not selected.
5. For Windows Server 2003 x64, a message prompts you to insert the ServerStart
Disc 2 and restart the system. Insert the ServerStart Disc 2 and restart the system.
4 When a message prompts you to insert the OS CD-ROM, insert the CD-ROM
and click [OK].
After files are copied, a message prompts you to insert the ServerStart CD-ROM.
5 Insert the ServerStart CD-ROM and click [OK].
For Windows 2000 / Windows Server 2003 / Windows Server 2003 x64
Insert the OS CD-ROM (Installation CD-ROM).
For Windows Server 2003 R2 / Windows Server 2003 R2 x64
Insert the OS CD-ROM (Installation CD-ROM) Disc 1. If a message prompts you to insert the
Disc 2, eject the Disc 1 and insert the OS CD-ROM (Installation CD-ROM) Disc 2.
After files are copied, a message prompts you to insert the ServerStart CD-ROM.
6 Insert the ServerStart Disc 1 CD-ROM and click [OK].
The License Agreement window appears.
7 Click [I agree].
After files are copied, a message prompts you to eject the CD-ROM and floppy disk.
8 Eject the CD-ROM and floppy disk and click [OK].
The system restarts. The system continues the installation operation after restart. OS GUI setup,
LAN utility installation, Service Pack installation, and Active Directory installation are
performed automatically.
9 When a confirmation message appears on restart, click [Restart].
The system restarts and installs high reliability tools.
10 When a message on installation completion appears, press any key.
11 Restart the system.
Click [Start] → [Shutdown]. Select [Restart] and click [OK]. The system restarts.
12 When the system restarts, log on to the server using the Administrator account
for the local computer.
The server setup and OS installation have been completed.
Refer to "Chapter 5 Operations after OS Installation" (
pg.135) and perform necessary procedures
before starting server operations.

Fujitsu Primergy RX300 S3 Specifications

General

Tcase	78 °C
Bus type	FSB
FSB Parity	Yes
Processor cache	4 MB
Processor cores	2
Processor model	5080
Processor series	Intel Xeon 5000 Series
Processor socket	LGA 771 (Socket J)
Processor threads	4
Processor codename	Dempsey
Motherboard chipset	Intel® 5000P
Processing Die size	162 mm²
Processor frequency	3.73 GHz
Processor cache type	L2
Processor lithography	65 nm
Processor system type	DP
Processor manufacturer	Intel
Processor package size	37.5 x 37.5 mm
Processor front side bus	1066 MHz
Processor operating modes	64-bit
ECC supported by processor	No
Thermal Design Power (TDP)	130 W
Processor core voltage (AC)	1.25 - 1.40 V
CPU multiplier (bus/core ratio)	14
Number of Processing Die Transistors	376 M
Maximum graphics card memory	8 MB
Memory slots	8
Internal memory	2 GB
Internal memory type	DDR2-SDRAM
Maximum internal memory	32 GB
Memory layout (slots x size)	2 x 1 GB
Networking features	Ethernet/Fast Ethernet/Gigabit Ethernet
Expansion slots	1 x PCIe x8, 2 x PCIe x4, 2 x PCI-X
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Noise level	56 dB
Chassis type	Rack (2U)
Compatible operating systems	Windows Server 2003, Novell SUSE Linux Enterprise Server, Red Hat Enterprise Linux, VMware ESX
I/O ports	8 x SAS
Power supply	600 W
Power requirements	100 - 240V, 50/60 Hz
Operating temperature (T-T)	10 - 35 °C
Safety	IEC 60950-1, EN 60950-1
Electromagnetic compatibility	EN 55 022 A, EN 55024, EN 61000-3-2 / -3-3
RAID levels	1, 5, 10, 50
Processor ARK ID	27213

Weight and Dimensions

Depth	785 mm
Width	483 mm
Height	86 mm
Weight	25000 g