Fujitsu Primergy RX300 S3 User Manual

9
PRIMERGY RX300 S3 User’s Guide
Chapter 5 Operations after OS Installation
5.1 Memory Dump/Paging File Setting . . . . . . . . . . . . . . . . . . . . . . 136
5.1.1 How to Obtain Memory Dump for Windows Server 2003 and Windows
Server 2003 x64 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136
5.1.2 How to Obtain Memory Dump for Windows 2000 Server . . . . . . . . . . . .141
5.2 Creating a Disk for System Recovery . . . . . . . . . . . . . . . . . . . . 146
5.2.1 Creating the Automated System Recovery (ASR) Set for Windows Server
2003 and Windows Server 2003 x64 . . . . . . . . . . . . . . . . . . . . . . . . . . .146
5.2.2 Creating a System Recovery Disk for Windows 2000 Server . . . . . . . . .147
5.3 Storing the System Configuration Information . . . . . . . . . . . . 148
5.3.1 Storing the BIOS Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
5.3.2 Recovering the BIOS Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
5.4 Creating Maintenance Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
5.4.1 Creating a Hardware Configuration Tool . . . . . . . . . . . . . . . . . . . . . . . . .151
5.4.2 Creating a DOS Floppy Disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154
5.5 Notes Before Operating the Server . . . . . . . . . . . . . . . . . . . . . 155
5.5.1 Applying the Hotfix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155
5.5.2 Auto-run Function from CD-ROM Drives . . . . . . . . . . . . . . . . . . . . . . . . .156
5.5.3 Drive Letter Assignment in Expert Mode . . . . . . . . . . . . . . . . . . . . . . . . .156
5.5.4 Notes on Advanced Uninterruptible Power Supply (UPS) . . . . . . . . . . . .157
5.5.5 Using the Fiber Channel Controller (PG-FC202) . . . . . . . . . . . . . . . . . . .157
5.5.6 Turning the Power On via a LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158
5.5.7 Other Notes on Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158
5.6 LAN Driver Advanced Setup [BACS] . . . . . . . . . . . . . . . . . . . . 160
5.6.1 BACS Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .160
5.6.2 Load Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .162
5.6.3 VLAN Setup Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .165
5.6.4
Cautions on Using the Teaming (SLB (Auto-Fallback Disable)) Function . .167
5.6.5 Cautions for Onboard LAN Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168
5.7 LAN Driver Advanced Setup [Intel® PROSet] . . . . . . . . . . . . . 169
5.7.1 Intel® PROSet Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169
5.7.2 Cautions for PG-185x/186x/188x/189x/286x LAN Driver V10.1 . . . . . . .170
5.7.3 Teaming Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170
5.7.4 VLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .172
Chapter 6 High Reliability Tools
6.1 RAID Management Tool [Global Array Manager] . . . . . . . . . . 174
6.1.1 Installing RAID Management Tool (Global Array Manager) . . . . . . . . . .174
6.2 Server Monitoring Tool [ServerView] . . . . . . . . . . . . . . . . . . . . 175
6.2.1 Installing ServerView . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176
6.2.2 Setting Required after Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176
6.3 Solving Problems Early [DSNAP] . . . . . . . . . . . . . . . . . . . . . . . 177
6.3.1 Installing DSNAP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177
6.3.2 How to Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .177

Fujitsu Primergy RX300 S3 Specifications

General

Tcase	78 °C
Bus type	FSB
FSB Parity	Yes
Processor cache	4 MB
Processor cores	2
Processor model	5080
Processor series	Intel Xeon 5000 Series
Processor socket	LGA 771 (Socket J)
Processor threads	4
Processor codename	Dempsey
Motherboard chipset	Intel® 5000P
Processing Die size	162 mm²
Processor frequency	3.73 GHz
Processor cache type	L2
Processor lithography	65 nm
Processor system type	DP
Processor manufacturer	Intel
Processor package size	37.5 x 37.5 mm
Processor front side bus	1066 MHz
Processor operating modes	64-bit
ECC supported by processor	No
Thermal Design Power (TDP)	130 W
Processor core voltage (AC)	1.25 - 1.40 V
CPU multiplier (bus/core ratio)	14
Number of Processing Die Transistors	376 M
Maximum graphics card memory	8 MB
Memory slots	8
Internal memory	2 GB
Internal memory type	DDR2-SDRAM
Maximum internal memory	32 GB
Memory layout (slots x size)	2 x 1 GB
Networking features	Ethernet/Fast Ethernet/Gigabit Ethernet
Expansion slots	1 x PCIe x8, 2 x PCIe x4, 2 x PCI-X
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Noise level	56 dB
Chassis type	Rack (2U)
Compatible operating systems	Windows Server 2003, Novell SUSE Linux Enterprise Server, Red Hat Enterprise Linux, VMware ESX
I/O ports	8 x SAS
Power supply	600 W
Power requirements	100 - 240V, 50/60 Hz
Operating temperature (T-T)	10 - 35 °C
Safety	IEC 60950-1, EN 60950-1
Electromagnetic compatibility	EN 55 022 A, EN 55024, EN 61000-3-2 / -3-3
RAID levels	1, 5, 10, 50
Processor ARK ID	27213

Weight and Dimensions

Depth	785 mm
Width	483 mm
Height	86 mm
Weight	25000 g