① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
② Select
from the menu with the
Jog key.
③ Open the setting screen by
pressing the Jog key.
（1 second）
Calling the setting screen
Beep sounds
When the THR stick
is set to the
specified position.
INH ⇔ ON/OFF
Switch selsction
Switch direction
Stick position
● When INH is selected, the function cannot be used. When
ON or OFF is selected, the function is activated. ON and OFF
changes are linked to the switch.
● This is a throttle stick position alarm.
When a throttle stick was besides the slow position
and a transmitter was turned on. → Alarm start
● The number in parenthesis
is the current throttle stick
position.
① Stick position is chosen by
Jog key
.
② Set the throttle stick to the
position at which you want
to generate the alarm.
③ When the Jog key is held
down the alarm sounds at
that position.
Memorize the position at
which the beep is to sound.
THR Stick
Position setting
An alarm (single beep) can be sounded at the specied throttle stick position.
●Alarm function ON/OFF can be set by switch.
"CNT ALM"
CNT ALM
Center alarm
(MULTICOPT)
● Select the item
with the Jog
key.
OFF
To Next Page
Loading...
