① Call the menu screen from the
home screen by pressing the + key
for 1 second.
＋
② Select
from the menu with the Jog
key.
③ Open the setting screen by
pressing the Jog key.
（1 second）
Calling the setting screen
Auxiliary channel function (AUX CH): defines
the relationship between the transmitter controls
and the receiver output for channels 5-6.
"AUX CH"
AUX CH
AUX Channel
(Common)
① A channel is chosen by Jog key.
Selection range：CH5, CH6
② Select the "SW" item and then select the switch
by pressing the + key or – key.
＋ －
or
Selection range：NUL, SwA-SwD,
VR
AUX Channel
Remember that if you assign primary control of
a channel to a switch which you later use for other
functions (like dual/triple rates or airbrakes), every
time you use that other function you will also be
moving the auxiliary channel.
● Select the item with the
Jog key.
To Next Page
Loading...
