116 117
IIDTool
GAP Diagnostic 2019-07-15 All Rights Reserved
User Manual : Version 33, Firmware V3.0
App
Figure 58. App : Test valve
Indicates that one does not wish to control height of this axle.
Indicates that one wants to control height of this axle.
Press the desired axle to select it. Press centre of the vehicle to select both axles.
To manually control a single wheel, click on it. The current height display of the selec-
ted wheel will then change to green and the wheel will be highlighted indicating that
only this wheel is selected.
To Next Page
Loading...
