Gap Diagnostic IIDTool - Changing a Height Setting

98
IIDTool
GAP Diagnostic 2019-07-15 All Rights Reserved
User Manual : Version 33, Firmware V3.0
restored.
Choose a height setting and press on Program to write it to the suspension ECU.
All changes are relative to the original standard height.
Changing a height setting
Figure 49. App : Changing a height setting
Use the arrows to increase or decrease the height.
Indicates that one does not want to change the height of both axles. Click to change
the state.
Indicates that one wants to change the height of both axles.