Gap Diagnostic IIDTool - 2.6 Synchronizing the Mobile Application (BT;Pro)

40
IIDTool
GAP Diagnostic 2019-07-15 All Rights Reserved
User Manual : Version 33, Firmware V3.0
2.5 Updating the IIDTool rmware
Purpose
Keep the IIDTool up to date.
Principle
Updatesaremadebyreashingthermware.
Note : The backed up data stored in memory will not be aected by the update.
Benets of updating the IIDTool
• Takeadvantageofbugxes(ifany)
• Takeadvantageofoperationalimprovementssuchasexecutionspeed...andmore
• Newadditionsinthetoolandapplication
Prerequisites
• HavingaccesstoaPCorMactypepersonalcomputerconnectedtoaninternetservice
• Havingregisteredonthewebsite(section 2.2)
• Havingcompletedinstallationoftheupdatersoftware(section 2.3)
• BT/Pro Having completed the mobile App installation or update (section 2.4)
2.5.1 Steps for updating the IIDTool
1- Connect the tool to the USB port of the computer using the supplied USB cable
2- Start the updater software previously installed in the computer
3- Click on “ FIND DEVICE ” and wait until pairing of the tool with the updater software is comple-
ted.Oncepaired,theuserinformation,vehicleinformationandcurrentrmwareversionofthe
tool will be displayed.
4- Selectthedesiredversionofthermwareintherightcomboorradiobox(ifavailable).
5- Clickon“PROGRAMFIRMWARE”.Theevolutionofeachdataleisobservableinsuccession
on the progress bar.
6- For IIDTool BT or Pro : A subsequent window will appear with “ACTION NEEDED”. The
requested operation is synchronization of the mobile App with the tool. Keep the tool connec-
ted to the computer to complete this step described in section, section 2.6. Note: Performing
synchronizationimmediatelyafterupdatingthetoolorbeforerstusagewillpreventprolongle
loading when connected to the vehicle due to a poor internet connection.