130 131
IIDTool
GAP Diagnostic 2019-07-15 All Rights Reserved
User Manual : Version 33, Firmware V3.0
Instructions
Follow instructions on screen.
Note : This routine will take a few minutes. We recommend using a battery maintainer. Signicant
vibrations and noises are normal when the pump gets activated.
4.7.14 Rain sensor
Initialization (L322-02, L322-06)
This routine is required when replacing the rain sensor.
4.7.15 Rear Dierential (VIN locked, L319, L320, L322-06, L322-10)
Self-Test
Usage
This routine is required when one of the following components is replaced:
• Reardierential
• ECU
• Reardierentialmotor
• Position sensor
• Temperature sensor
Preparation
• The vehicle must remain stationary
• Thedierentialtemperaturemustbelessthan140degreesCelsius.
Instructions
Follow instructions on screen