Gap Diagnostic IIDTool - 4.10 Function “Car Configuration”

122
IIDTool
GAP Diagnostic 2019-07-15 All Rights Reserved
User Manual : Version 33, Firmware V3.0
DPF Replacement Reset (L316-12)
Usage
This routine is required when the Diesel Particulate Filter is replaced.
This routine should only be used after the Diesel Particulate Filter is replaced.
Mass Air Flow Replacement Reset (L316-12)
Usage
This routine is required when the MAF sensor is replaced.
Reset Oil Counter (L316-12*, L359 2013+)
Usage
This will reset the oil counter and remove the service reminder warning displayed on the instrument
cluster.
CAUTION
For vehicles equipped with a diesel particulate lter, the reset func-
tion aects the regeneration process. Therefore, an oil change should
be made at the same time as reset. Not changing the oil can cause
serious engine damage.
*SeetheinstrumentpackECUforothervehicles.
Turbocharger Replacement Reset (L316-12)
Usage
This routine is required when the turbocharger is replaced.
Renew security ID between 10AS and PCM (L316)
Usage
This routine is required when the engine ECU is replaced.