Gap Diagnostic IIDTool - Functions Classification

20
IIDTool
GAP Diagnostic 2019-07-15 All Rights Reserved
User Manual : Version 33, Firmware V3.0
Some functions refer to the IIDTool itself.
IIDTool settings
Version
IIDCong
Table 2. Functions categorized by Objectives (continuation)
1.4.2 Functions classication
Thefunctionsaredividedintotwoclasses.Thisdistinctiona󰀨ectstheaccesslevelofIIDToolfunctions.
Full diagnostic capability Advanced programming functions*
Reading and clearing fault codes Systems and components calibrations
Live values Height (air suspension)
Control IOs
Changingcongurationsorparametersofthevehicle
(CCF)
Service routines
Changing congurations or parameters of individual
ECUs (L322-02, L322-06 and L316)
Height control Key programming
ECU info ECU update, Re-Flash
Engine re-mapping, EGR (exhaust gas recirculation)
blanking,speedlimitmodicationandmore**
Save/Restore(suspensionandcongurations)
Table 3. Functionsclassication
*Advancedprogrammingfunctionsareonlyaccessibleoncethetoolisactivated(section 2.2 and sec-
tion 2.9).
**Sold separately by Bell Auto Services (BAS Remaps) and delivered by the IIDTool. Please visit http://
bellautoservices.co.uk/ for more details.