Gap Diagnostic IIDTool - Brief Descriptions of Offered Functions; Functions Categorized by Objectives

18 19
IIDTool
GAP Diagnostic 2019-07-15 All Rights Reserved
User Manual : Version 33, Firmware V3.0
1.4 Brief descriptions of o󰀨ered Functions
ThethreeIIDToolmodelso󰀨erarangeoffunctionstoachievethefourmainobjectives,categorizedin
the following table.
Note : Functions denitions, examples and operating procedures are found in section 4 of this manual.
1.4.1 Functions categorized by Objectives
Diagnostic Personnalisation Repair process Administer ECU
Faults
Read/Clear
Advanced Read
Height : Height
modication,airsus-
pension
Calibrations ECU Information
Live values (surveil-
lance)
CarConguration Service routines Save/Restore
ControlIO(Inputs/
Outputs)
ECU update (Re-
Flash)
Convenience
Height Control
Table 1. Functions categorized by Objectives
Note : Some functions can help achieve more than one goal; this is particularly the case for the “Fault”
function and “Re-Flash” after a repair. Please consult Diagnostic Keys (section 3) for details.