Gap Diagnostic IIDTool - Faults Types, Brief Description

74
IIDTool
GAP Diagnostic 2019-07-15 All Rights Reserved
User Manual : Version 33, Firmware V3.0
3.1.3 Faults types, brief description
Denition
Warning message or light
on Instrument Pack
IIDTool function used
Conrmed Fault
Fault permanently present
(andimplicitlyconrmed)
Possible Faults
Pending fault
Fault detected, but requiring
more testing before being
consideredconrmed
On rare occasions only
Advanced Read
Consecutive or
Cascading Fault
Fault derived from the
resultofacascadinge󰀨ect
(appearanceofaconrmed
fault on a ECU which gene-
rates one or more other
faults on this or other ECUs
Most probably Faults
Table 18. Fault types, brief description