Gap Diagnostic IIDTool - Page 73

72 73
IIDTool
GAP Diagnostic 2019-07-15 All Rights Reserved
User Manual : Version 33, Firmware V3.0
Drive cycle
Period and conditions allowing ECUs to complete the test or sequence of tests required to detect all
types of faults on their systems revealing the presence or absence of a potential anomaly.
The test cycle consists of an engine starting, driving the vehicle and stopping the engine (with increase
in temperature of cooling liquid and lubricants).
Itisadvisablethatthedi󰀨erenttypesofdriving(urbanandmotorway)bepartofthesamedrivecycle.
Forconrmation,somerequireatleasttwodrivecycles.Toensureconrmationofafault,ingeneral,it
is suggested to use the vehicle normally (including drive cycles) over a period of one week.
Note : The ideal drive cycle varies depending on the vehicle, the driving conditions and the anomaly
to be detected.