Gap Diagnostic IIDTool - Permissions

70
IIDTool
GAP Diagnostic 2019-07-15 All Rights Reserved
User Manual : Version 33, Firmware V3.0
2.9.8 Permissions
Purpose
Indicateswhichpermissionsareavailablewhenatoolisconnectedtoaspecicvehicle.Clickonthe
More button located on the top bar to show permissions.
Figure 38. App : Viewing permission example
Denitions
• Limited Mode/Full Mode: Limited Mode gives access to Diagnostic functions while Full Mode
also allows usage of Advanced programming functions, see section 1.4.2.
• Full Live Values: This allows viewing tested and untested live values, section 4.8
• Full CCF: This allows viewing and editing of tested and untested CCF settings, section 4.10
Updating permission
• From Limited Mode to Full Mode: This requires the tool to be activated as per section 2.9 or
anadditionallicencetobeaddedforaspeciccarsection 2.9.5.
• Full Live Values:Thisisavailablewithoutanyintervention.Thetoolmaynoto󰀨erFullLive
Values for all supported vehicles. In which case, the Untested list will be empty,
• Full CCF:Thisisavailableuponrequest.Thetoolmaynoto󰀨erFullCCFforallsupportedvehi-
cles. In which case, the Untested list will be empty.
If changes were made, simply click on the Update Device Info button.