Gap Diagnostic IIDTool - Function ECU Info

184
IIDTool
GAP Diagnostic 2019-07-15 All Rights Reserved
User Manual : Version 33, Firmware V3.0
4.12 Function “ ECU Info ”
Denition
II This function allows viewing the following information of the selected ECU:
• Hardware
• Assembly
• Strategy
• Calibration
• ECU Serial number
Access
1- Perform the initial stages of access (section 4.1.3)
2- Select the “ ECU Info ” function
II
3- Navigate through the ECUs using commands
4- Select the desired ECU
5- Therstleinfowillbedisplayed.Pressthe buttontoseethenextleinformationforthis
ECU.