Gap Diagnostic IIDTool - Disconnecting the Iidtool

56
IIDTool
GAP Diagnostic 2019-07-15 All Rights Reserved
User Manual : Version 33, Firmware V3.0
2.8.6 Disconnecting the IIDTool
The IIDTool was not designed to remain permanently connected to the OBDII port of the vehicle. Dis-
connect the IIDTool after each use.
The IIDTool can be disconnected at any time except:
Warning !DonotdisconnectIIDToolduringanECUash,orwhenwritingtheCarCongurationFile
(CCF) as a breakdown or serious consequences could arise (descriptions of these functions and reco-
very methods are found in section 4.10 and section 4.11).
IIThe“Exitmenu”messageisdisplayedintheinterfacetoconrmtheendofasessionandindicates
the possibility of disconnection.
II The tool will automatically terminate any task and exit if the vehicle is in motion except during live
values viewing (section 4.8).