Gap Diagnostic IIDTool - Page 174

174
IIDTool
GAP Diagnostic 2019-07-15 All Rights Reserved
User Manual : Version 33, Firmware V3.0
Regular non-Bluetooth IIDTool, rst hardware version: Usage of the PC-based controller is man-
datory. The IIDTool must be connected to the computer until the process is completed. The option
willbedisplayedonyourcomputerscreen(re-ashmenu).Pleaseconsultsection 2.8.5 of this user
manual for more details on the PC-based interface. If using a laptop, make sure the battery charger is
connected. Close all programs, disable all automatic updates and screen saver. The computer does
not need to be connected to the internet.
Regular non-Bluetooth IIDTool, second hardware version: The function is embedded in the IIDTool
rmware.User canchoose betweenthe regularIntegrated Interfaceor PC-basedinterface. When
using a laptop, make sure the battery charger is connected. Close all programs, disable all automatic
updates and screen saver. The computer does not need to be connected to the internet.
Steps, IIDTool BT, Pro and regular IIDTool rst hardware version
L322-2005 and L322-06
• SelecttheBluetoothre-ashandfollowtheinstructionsonscreen.
• TheprocessisdonewiththekeytotheAccessoryposition(I).Makesurethattheheadlightsare
turnedo󰀨andthatanyunnecessarylightsoraccessoryareturnedo󰀨also.
• Uponcompletion,turnthekeytotheONposition(II)andfollowtheinstructionsonscreen.
L319-04 and L320-05
• SelecttheBluetoothre-ashandfollowtheinstructionsonscreen.
• TheprocessisstartedwiththekeytoIgnition,positionII.Oncere-ashinghasbegun(indicated
on the Navigation screen), the key can be removed. It can also be left in position II in which
case the user should keep an eye on the vehicle and wait until completion (the instrument pack
will wake up). Failure to turn the key to the OFF position after the procedure is completed (or if
a failure occurred) will lead to a battery drain if not connected to a power supply.
• Uponcompletion,turnthekeytotheONposition(II)andfollowtheinstructionsonscreen.
Steps, regular IIDTool second hardware version
• SelecttheBluetoothre-ashandfollowtheinstructionsonscreen.
• TheprocessisstartedwiththekeytoIgnition,positionII.Oncere-ashinghasbegun(indicated
on the Navigation screen), the key can be removed. It can also be left in position II in which
case the user should keep an eye on the vehicle and wait until completion (the instrument pack
will wake up). Failure to turn the key to the OFF position after the procedure is completed (or if
a failure occurred) will lead to a battery drain if the vehicle’s battery is not connected to a power
supply.
• Uponcompletion,turnthekeytotheONposition(II)andfollowtheinstructionsonscreen.
Keep an eye on the vehicle and wait until completion (the instrument pack will wake up). Failure to
remove the key from the ignition after the procedure is completed (or if a failure occurred) will lead to
a battery drain if not connected on a power supply.