Chapter 5. Communication
106 AT600 User’s Manual
Command 176 (0xB0): Read Digital Configuration
This command is to read the digital output configuration.
Table 66: Request Data Bytes
Byte Format Description
None Unsigned-8 Channel Number (1/2)
Table 67: Response Data Bytes
Byte Format Description
0 Unsigned-8 Channel Number
1 Unsigned-8 Digital Output type:
0: Off; 1: Pulse; 2: Frequency; 3: Alarm;
Table 68: Command-Specific Response Codes
Code Class Description
0 Success No Command-Specific Errors
1 Undefined
2 Error Invalid Selection
3-4 Undefined
5 Error Too Few Data Bytes Received
6 Error Device-Specific Command Error
7-127 Undefined
To Next Page
Loading...
