Chapter 5. Communication
142 AT600 User’s Manual
Command 233 (0xE9): Write Signal Setup (cont.)
Command 239 (0xEF): Reset Flow Meter Data
This command is to reset flowmeter data.
Table 170: Command-Specific Response Codes for Write Signal Setup
Code Class Description
0 Success No Command-Specific Errors
1 Undefined
2 Error Invalid Selection
3-4 Undefined
5 Error Too Few Data Bytes Received
6 Error Device-Specific Command Error
7Error In Write Protect Mode
8-15 Undefined
16 Error Access Restricted
17-127 Undefined
Table 171: Request Data Bytes for Reset Flow Meter Data
Byte Format Description
0 Unsigned-8 Reset type:
1. Reset Error Log
2. Forward Inventory
3. Reverse Inventory
4. Net Inventory
5. Inventory Time
6. All
7. Inventory
To Next Page
Loading...
