GE Definium AMX 700 - Page 12

Revision History
Definium AMX 700 X-Ray System 5161515-1EN Rev. 6 (10 February 2008) iv
Operator Manual © 2008 General Electric Company. All rights reserved.
2 (continued) A4-2 Changed the warning into a note in the “switch screen tab” row of table A4-1.
A4-4 Removed Small and Large Pediatric from the list of patient sizes in table A4-1.
A4-6 Added “wireless connection status” row to table A4-1.
A4-10 Removed Small and Large Pediatric from the list of patient sizes in note below
step 3.
A4-11 Added tech switch to step 11.
Added screen text to paragraph before figure A4-7.
A4-12 Added note and process before step 1.
A4-12 Added step 4.
Corrected step 5.
Added note after step 5.
A5-4 Added “network connection status” and “wireless network connection status”
rows to table A5-1.
A6-4 Added descriptions of “PACS Test Images” and “TG-18 Samples” to Image Tools
row of table A6-1.
Added to the description of “Patient Information” button in table A6-1
A6-5 Added “network connection status” and “wireless network connection status”
rows to table A6-1.
A7-7 Added wireless network connection trouble shooting steps to “Failed C-echo
Test”.
A7-30 Updated steps 2-4.
A7-32 Added “Enable or Disable Technical Mode” section.
A7-33 Added Exam section.
A7-35 Updated step 6.
A8-3 Updated note at top of page.
Added last bullet to list under “Quality Test Preparation”.
A8-4 Updated step 2.
A8-7 Added paragraph and IMPORTANT note before figure A8-8.
A8-8 Updated step 2.
Updated note below step 4.
A8-9 Updated caption of figure A8-12.
A8-9 -- 11 Re-wrote process steps 5-13.
A8-15 Updated approved cleaning chemicals list.
Added Grid Cleaning section.
B-15 Updated second, third, and fourth paragraphs of section.
3 12 Jul. 2006 2-5 Added new warning in accordance with FDA requirements.
Deleted redundant caution.
6-3 Changed “Slow Charging” to “Standby Mode” and updated description of
function.
6-5 Changed “Slow Charging” to “Standby Mode” and updated procedure.
Rev
#
Date
Pages
Affected
Reason for Change
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).