GE NetworX V3

NetworX Version 3 Installation Manual
119
LOCATION 70 - AUX POWER OVERCURRENT/ AUX POWER OVERCURRENT RESTORE
COMMUNICATOR CODES, SLOW SPEED FORMATS ONLY (4 segments, numerical data)
Location 70 contains the tens and ones digits for a 4+2 and 3+1 format that will be sent if “Aux
Power Overcurrent Reporting” is enabled. Segment 1 contains the tens digit of the “Aux Power
Overcurrent Reporting”. Segment 2 contains the ones digit of the “Aux Power Overcurrent
Reporting”. Segment 3 contains the tens digit of the “Aux Power Overcurrent Restore”. Segment 4
contains the ones digit of the “Aux Power Overcurrent Restore”.
For a 3+1 format, only the segment 1 resp. segment 3 digit (tens) will be sent.
LOCATION 71 - BELL TAMPER AND BELL TAMPER RESTORE COMMUNICATOR CODES, SLOW
SPEED FORMATS ONLY (4 segments, numerical data)
Location 71 contains the tens and ones digits for a 4+2 and 3+1 format that will be sent if siren
supervision reporting is enabled. Segment 1 contains the tens digit of the “Bell Tamper Reporting”.
Segment 2 contains the ones digit of the “Bell Tamper Reporting”. Segment 3 contains the tens digit
of the “Bell Tamper Restore”. Segment 4 contains the ones digit of the “Bell Tamper Restore”.
For a 3+1 format, only the segment 1 resp. segment 3 digit (tens) will be sent.
LOCATION 72 - TELEPHONE LINE CUT RESTORE COMMUNICATOR CODES, SLOW SPEED
FORMATS ONLY (4 segments, numerical data)
Location 72 contains the tens and ones digits for a 4+2 and 3+1 format that will be sent if “Telephone
Line Cut Restore Reporting” is enabled. Segment 1 and segment 2 are reserved. Segment 3 contains
the tens digit of the “Telephone Line Cut Restore”. Segment 4 contains the ones digit of the
“Telephone Line Cut Restore”.
For a 3+1 format, only the segment 3 digit (tens) will be sent.
LOCATION 73 - Reserved
LOCATION 74 - EXPANDER TROUBLE AND EXPANDER TROUBLE RESTORE COMMUNICATOR
CODES, SLOW SPEED FORMATS ONLY (4 segments, numerical data)
Location 74 contains the tens and ones digits for a 4+2 and 3+1 format that will be sent if “Expander
Trouble Reporting” is enabled. Segment 1 contains the tens digit of the “Expander Trouble
Reporting”. Segment 2 contains the ones digit of the “Expander Trouble Reporting”. Segment 3
contains the tens digit of the “Expander Trouble Restore”. Segment 4 contains the ones digit of the
“Expander Trouble Restore”.
For a 3+1 format, only the segment 1 digit resp. segment 3 digit (tens) will be sent.